OIL field Products
Cam lock coupler (AI, Brass & SS)
Part A Male Adpater Female Thread
this 316 Stainless Steel “A” type branded camlock coupling is made from our tooling, and consists of a male grooved adaptor with a female NPT thread of the same size. It offers a straight through leak proof connection.
Part B Female Coupler Male Thread
This 316 Stainless Steel “B” type branded camlock coupling is made from our tooling, and consists of a female coupler with a male NPT thread of the same size. Part B Female Coupler offers a straight through leak proof connection.
Part C Female Coupler Hose Shank
Female Coupler by hose shank, is normally used with Type E, A, F and Dust Plug adapters of the same size. Camlock fittings are often found in suction/discharge hoses of agriculture or industry applications.
Part D Female Coupler Female Thread
This aluminium “D” type branded camlock coupling is made from our tooling, and consists of a female coupler on one end and female BSP on the other. Offers a straight through leak proof connection.
Part E Male Adpator Male Thread
Brass camlock Adapter E- male adapter by hose shank, is often used with Part C, B, D & Dust Cap of the same diameter. Quick hose camlock couplings save your time of connecting/disconnecting hoses to pumps, tanks, IBCs and other places.
Part F Male Adapter Male Thread
Type F Camlock Couplings enable pipe and hose connections to be made without the use of hands tools. It eliminates the difficulty in making threaded connections or a flanged connection.
Dust Cap for use with adaptors
Stainless Steel dustcap with adaptors that have a small cover used on the valve stem of a bicycle or car tire to prevent dust or other small particles from entering the valve and damaging it. The dustcap also forms a pressure seal, helping to prevent deflation of the tire due to slight gas seepage past the tire valve.
Dust plugs for use with coupler
The 634A Dust Plug is installed in the end of the 1711D, and is designed to help prevent dust, dirt and debris from damaging the internal components of the Coupler. Dust Plugs are designed to connect fuel delivery transport truck hoses or nozzles to the fill pipe of an aboveground storage tank.
A weld neck flange is a type of flange which is used with pipes. The long type is only used in a process plant. The weld neck flange consists of a circular fitting with a protruding rim around the circumference.
A blind flange is a solid flange used to block off a section of pipe or a nozzle on a vessel that is not used. The blind flange is basically a flange that does not have a hub or a bored centre.
Slip On Flange
Slip on Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter.
socket weld flange
Socket-weld pipe flanges are typically used on smaller sizes of high pressure pipes.These flanges allows for a smooth bore and better flow of the fluid or gas inside of the pipe.
Lap joint pipe flanges slide directly over the pipe and are most commonly used with stub end fittings. Lap Joint funnel ribs are regularly utilized for applications that require frequent dismantling.
Threaded Flanges can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection.
A orifice flange is utilized to quantify the progression of the liquid passed on by the pipeline by means of a stream spout situated on the rib itself. Sets of weight tappings are machined onto the opening spine, making separate tappings on the channel divider superfluous.
A spectacle blind flange is a wellbeing gadget used to segregate an area of line or bit of hardware when the line or gear should be examined or expelled from administration. It is a steel plate cut into two circles of a specific thickness.
Pipes & Fittings
Galvanized Iron Pipe Fittings or GI Fittings are malleable iron fittings used for connecting pipes. These are used to attach one pipe to another in order to lengthen the run or change the flow direction in a plumbing system.
Butt Weld Fittings
A butt weld fitting is a weldable channel fitting that takes into consideration altar of course of stream, to diverge, decrease pipe measure or append helper equipment. Used to interface funnels and fittings closed by butt welding process.
Forged Fittings are accessible as socket weld pipe fitting or threaded pipe fitting. It is used in industries like compound, petrochemical, power age and OEM fabricating industry as it can be used in high weight conditions.
Stainless steel tube fittings are all the connecting fittings that butt weld to tube. These fittings are measured on the outside diameter of the tube and are available in grades 304 or 316 stainless. The main forms are: Tube bends in 45 degree, 90 degree, 180 degree and 1x Diameter short radius 90 degree.
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
Stainless steel pipe is primarily used in piping systems for the transport of fluids or gases. Stainless steel pipe resists oxidation, making it a low maintenance solution that is suitable for high temperature ad chemical applications. It is easily cleaned and sanitized.
MS pipes are mild steel pipe tubes that have high tensile strength, MS pipes are extremely stronger, low level of carbon, they can be handily welded, simple to manufacture and accessible promptly, not very exorbitant in contrast with different metals and long existence of 100 years or more. Some of the major applications of mild steel pipes are structural purposes, mechanical reason, general building, residential applications, planning transport body, fencing, construction structure and water steel pipes.
Cast Steel Valves
Cast steel is a ferrous alloy with a maximum carbon content of approximately 0.75%. Steel castings are solid metal objects produced by filling the void within a mold with liquid steel. They are available in many of the same carbon and alloy steels that can be produced as wrought metals.
The major characteristics of stainless steel ball valves maintain a tight configuration, a convenient operation and repairing. Besides, such ball valves are conductive to the regulation of air, water, vapors, various erosive medium, mud, oil, liquid metal, radioactive medium and etc.
FORGED STEEL valves are made utilizing a fashioning technique that includes moulding metals and amalgams while they're in their strong structure. FORGED STEEL valves presents numerous advantages for mechanical organizations.
A butterfly valve is a device for interrupting or regulating the flow of a fluid in a duct, increasing or reducing the passage section by means of a plate, called a "butterfly", which rotates on an axis. By reducing the passage area, the local pressure drop in the valve increases, reducing the flow.
Expansion Joint, Pressure Gauge Gland and spiral wound gasket
Expansion Joint Rubber
Expansion Joints Rubber are a flexible connector fabricated from natural or synthetic elastomers and fabrics with metallic reinforcements designed to provide stress relief in piping systems due to thermal changes.
Pressure gauge is a device that is used to measure the condition of a fluid in its static as well as kinetic state. We supply pressure gauges that are used for multiple purpose such as measuring the pressure of a liquid and gas and various types of chemicals.
spiral wound gasket
The spiral wound gasket is semi-metallic, consisting of a spirally wound v shaped stainless steel strip and a non-metallic filler material, such as graphite or PTFE. Also on the gasket, is a solid outer ring used for centring and controlling compression.
The gland packing is a contact-type sealing element. Compared with other types of shaft seals, they are adjustable and suitable for use with pressures and circumferential speeds higher than those radial shaft seal rings.
Non-asbestos gaskets provide durable, flexible sealing and insulation in high-temperature environments that also require resistance to air, water, steam, oils, acids, or chemicals. These industrial gaskets are made of compressed sheet materials that consist of fibers such as aramid and an elastomeric binder.